BIOTENPackaging platingPHAAquatic photo-oil application release
Face the last level.
Hold on to the light, leave a mark.
Let the light be more restrained and the touch cleaner.
Bio-based PHA, a naturally matte finish and a skin-friendly feel
Water-resistant, grinding, scratch-resistant and sticky.
Supports certification under BPI, DIN CERTCO and ABA composting schemes
BIOTENThe cynics are colder and more resistant to condensation.
Packaging is remembered, not necessarily because of the stronger reflectors.
Let paper texture and ink levels continue to be seen
This layer of surface engineering, which affects how light falls on ink and fingertips sense paper, is also subject to the manufacturing and use test of friction, stacking, folding boxes and stickers. It is not just a choice for "light" or "blut" but a key interface between visual, touch and manufacturing.
BIOTENPackaging starts from this interface by exploring a quiet and advanced level: looking for a more balanced balance between light, touch, paper texture, ink and post-print processing.
A quiet and measured surface: a mute of restraint, a delicate and stable sense of slide, and the continued presence of paper texture and ink.
PHAAquatic light oil, how do you get into paper light and touch?
Design the dumbness and touch from the material itself.
We don't put it."PHA"is directly equivalent to dumb or soft touch, but insteadPHAAs a controlled, comparable material variable. Research on more natural, restraint-free dumbness, more subtle slides and paper stripes and ink reservations, combined with specific patterns, dispersion and membrane conditions.
Not covering paper, but keeping the texture and ink levels visible.
From surface perception to engineering indicators.
The test criteria need to be defined before the perception target can be converted into evidence. No typical or specification values are provided at this time, and only test items are listed below.
BIOTEN PHA waterborne varnish: translucent appearance | solids 35±1% | pH 7.3–7.9 | viscosity 20–300 | density 1.057 at 25°
Tactile and sliding design targets: static friction coefficient μs: 0.35 | dynamic friction coefficient μk: 0.30 | static–dynamic difference Δμ: 0.05 | sliding stability CV ≤8% | overall blind tactile assessment score ≥5.5/7 and tactile preference rate ≥70% (n≥30).
Process suitable for appropriate materials: paper, cardboard. Print as applicable; tycoon, soft print, dent print, digital printing.
It can be painted with a background or face, solves printing problems and improves the clarity of patterns and quiet surfaces.
Additional information: the BIOTEN PHA waterborne varnish product is described as capable of meeting BPI home-compostability certification requirements. Final performance depends on paper, inks, coat weight, drying conditions and test methods, and must be confirmed by actual testing under specified conditions. Contact the BIOTEN Packaging technical team for the full TDS.
The surfaces are visible, touched and behind them are the original technology.
The quiet, advanced touch wrapping surfaces, not just from visual design.PHAInnovative discoveries of decentralized processes. The dumbness and the touch are not combined with the aid or coordinated printing processes.PHAAquatic light oil. Around.PHAWater surface materials,BIOTENThe package continues to promote the development of original technologies for oil and ink.PHAWater-touching barrier to light oil and microbiological fermentationPHAThe biologically based low VOC water ink combinations and their methods of preparation are authorized bulletin No. 12149685 B and C21319702B respectively.
The following is a video of the ink that was used to keep the light oil from being isolated from the bio-water touch.BIOTENPackaging is expanding.PHAApplications in paper packaging surface engineering provide a more balanced balance between light, touch, surface protection and printing.
Let's get the next paper wrapper, starting with the last floor.
Print packaging companies, brand parties and channel partners are welcome to apply for samples, and to undertake paper matching, post-printing tests and joint sampling so that light, touch and surface protection actually fall on products.
Cooperation in marketing of the TDS-based product for sample samples
